Your CCTV, Security and IT is our priority
MultiVision Technology
Hikvision Ultra Face Recognition Terminal
R30,900.00
with Temperature Screening Function. Supports Vanadium Oxide uncooled sensor to measure target’s temperature; Temperature measuring range: 30 °C to 45 °C (86 °F to 113 °F), accuracy: ± 0.5 °C without black body calibration; Recognition distance: 0.3 to 2 m; Fast temperature measurement mode: Detects face and takes skin-surface temperature without identity; Multiple authentication modes are available: card and temperature, face and temperature, card and face and temperature; Face mask wearing alert; 7-inch LCD touch screen; 2-MP wide-angle lens; Built-in Mifare card reading module; Max.50,000 faces capacity, Max.50,000 cards; Verification methods: Supporting fast temperature measurement and face/card recognition with temperature screening; Authentication distance: 0.3-2 m; Temperature range: 30-45℃, accuracy: ±0.5℃; Supports 6 attendance status, including check in, check out, break in, break out, overtime in, overtime out; Without power supply.
- Supports Vanadium Oxide uncooled sensor to measure target’s temperature
- Temperature measuring range: 30 °C to 45 °C (86 °F to 113 °F), accuracy: ± 0.5 °C
- Recognition distance: 0.5 to 1.5 m
- Fast temperature measurement mode: Detects face and takes temperature without identity authentication
- Multiple authentication modes are available: card and temperature, face and temperature, card and face and temperature, etc
- Face mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance is valid
- Forced mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance will be failed
- Displays temperature measurement results on the authentication page
- Triggers voice prompt when detecting abnormal temperature
- Configurable door status (open/close) when detecting abnormal temperature
- Transmits online and offline temperature information to the client software via TCP/IP communication and saves the data on the client software
- Face recognition duration <2 s/User; face recognition accuracy rate ≥ 99%
- 50,000 face capacity, 50,000 card capacity, and 100,000 event capacity
- Suggested height for face recognition: between 1.4 m and 1.9 m
- Supports 6 attendance status, including check in, check out, break in, break out, overtime in, overtime out
- Watchdog design and tamper function
- Audio prompt for authentication result
- NTP, manually time synchronization, and auto synchronization
- Connects to external access controller or Wiegand card reader via Wiegand protocol
- Connects to secure door control unit via RS-485 protocol to avoid the door opening when the terminal is destroyed
- Imports and export data to the device from the client software
- * Biometric recognition products are not 100% applicable to anti-spoofing environments. If you require a higher security level, use multiple authentication modes.
- * In order to get an accurate temperature, after the device is powered on, you should wait for 90 min to warm the device up.
Contact Multivision
Training & Installation
We provide on site training on CCTV functionality and monitoring. Our service level agreements are supported by Qualified Technicians.
Reviews
There are no reviews yet.